Car Scratch Remover

If you own a car long enough, sooner or later. It’s going to experience a scratch or a blemish of some sort. Possibly even a little bit of fading. And when it does, how do you repair it? There are quite a few different scratch repair kits on the market. And today we’re going to talk about a whole bunch of different kits.

Everything You’ll Need

We’re not psychic, nor are we snooping through your toolbox or garage, so here’s what you’ll need to get the job done. 

Car Scratch Remover Tool List 

• Bucket for soap and water .
• Car-specific soap.
• Water.
• Microfiber towels.
• Buffer (if applicable).
• Cordless drill (if applicable).
• Sandpaper in a selection of grits (i.e., 1000, 2000, and 3000).
• Polish. 
• Wax.
• Isopropyl alcohol.

Car Scratch Remover Parts List 

• Scratch repair kit.
• Easy-release painter’s tape.
• Can of auto-body primer .
• Automotive touch-up paint (A quick online search can help you find your car-specific paint color).
• Clearcoat lacquer .

Here’s How To Remove Scratches From Your Car’s Paint?

Surface Scratches (w/Scratch Filler Kit)

1. Wash the area you’ll be working on with a car-specific soap.
2. Using a microfiber towel, dry the area thoroughly.
3. Apply a small dab of isopropyl alcohol on a clean microfiber towel and gently wipe the scratched surface to remove any wax, polish, and debris that could affect the scratch repair solution.
4. Use easy-release tape to mark off an area around the scratched surface.
5. Using a scratch repair kit, apply the filler (usually a type of resin) to the scratch as directed. 
6. Allow the resin to dry, as directed.
7. Spray the affected area with sanding/buffing lubricant provided.
8. Using a selection of sandpaper provided with the kit, buff the area in stages, starting with the coarsest and ending with the finest. Make sure to moisten both the sandpaper and work area with lubricant provided. 
9. Polish and wax the affected area as directed to match the surrounding finish.
10. You did it. Give yourself a round of applause.

Car Scratch Remover Tips From a Pro

For this job, we asked Larry Kosilla, owner and operator of AMMO NYC, and the detailer for Bugatti, to give us his top tips for removing scratches from your car’s paint. You’ll want to pay attention. 

• If the scratch is thin and deep, use a glazing spot putty to fill the void or crater before applying a touch-up on top. Squeeze a bit of putty next to the scratch. then using a small squeegee, spread the putty into the scratch. 
• Allow the glaze to dry for 2 to 3 minutes. Once dry, wrap a towel around a wet-sanding block and apply a liquid paint leveler to the towel. The leveler will remove the putty surrounding the scratch. 
• Gently wipe the towel over the scratch, switching up your movements so as to not favor one direction or another. You’re then free to touch up the scratch using the code-correct paint.

Life Hacks

Since you may not have access to the right tools, we also compiled a list of hacks to make your life easier and drain your pocket less.

• Toothpaste can be used to remove superficial (non-fingernail) surface scratches. ash and dry the affected area. Lightly wet a microfiber towel and apply a dime-sized dollop of toothpaste. In a circular motion, rub the toothpaste into the scratches until it’s evenly applied. Rinse the affected area. If the scratch is still visible, repeat the process once more. Don’t exceed three times as it could cause further damage.

How much does it Cost to Repair a deep Scratch on a Car?

Scratch remover pricing can vary depending on the depth of the scratch. Whether or not it can be buffed out, size and location. And if you’re doing it yourself or having a professional take care of the removal. Smaller, DIY scratch removal jobs like the one detailed above, can cost as little as $20. Large-scale scratch fixes where a certified professional is required can cost upward of $1,000, again depending on a number of factors.

Let’s find out!

Which brand is the best and at first we’ll see which brand does the best removing paint scratch to a clear coat finish. We’ll then see which brand works fastest for removing minor paint scratches and improving faded paint. 

Car paint finishes usually include three layers:

A Car scratch repair kit isn’t designed to replace paint that’s missing in this case, the scratch is down to the primer level, and these kits won’t help. car paint finishes usually include three layers.

• The first layer is the primer which is applied directly into the car body panel. 
• The next layer is the base coat or color, which is typically two thin coats of paint. 
• The top layer is called a clear coat; it typically has three to four layers of transparent paint. All of the products are designed to repair scratches and scuffs to the clear coat only.

Tips to understanding the scratch is deeper or not:

Sometimes this trick works; it doesn’t but if you have a scratch and you’re not sure if it’s gone through the clear coat. Then you can spray a little bit of water on top of the scratch. If you still see the scratch, there’s a good chance. It’s gone more profound than the clear coat.

1. Wash the area you’ll be working on with car-specific soap.
2. Using a microfiber towel, dry the area thoroughly.
3. Apply a small dab of isopropyl alcohol to a clean towel and wipe the scratched surface to remove any wax, polish, and debris that could affect the scratch repair solvent.
4. Let dry.
5. Using the painter’s tape, tape off an area surrounding the scratch.
6. Put on the ventilator.
7. Using 1,200-grit sandpaper or sanding pads and a random-orbit sander, remove the clear coat and paint from the affected area. Sand down to bare metal.
8. Remove the painter’s tape.
9. Rinse the area with water to see if further sanding is needed.
10. Rinse and dry the area thoroughly. Wipe with isopropyl alcohol.
11. Tape off and cover all exposed paint surrounding the affected area.
12. Apply an even coat of primer to the affected area.  
13. Wait for the primer to dry (15 to 20 minutes depending on area size).
14. Wet a section of 2000-grit sandpaper and sand the affected area until smooth.
15. Wipe the surface with isopropyl alcohol.
16. Using the code-correct paint, apply an even coat to the affected area.
17. Wait for the paint to dry (15-20 minutes).
18. Wet a section of 2000-grit sandpaper and sand the affected area until smooth.
19. Wipe the surface with a clean rag.
20. Apply another coat of paint to match the rest of the car.
21. Wait for the paint to dry (15-20 minutes).
22. Apply a clear coat to the affected area.
23. Remove painter’s tape.
24. Wait for the clear coat to dry and cure (overnight, or as recommended).
25. Once the clear coat is dry, polish and wax as directed.
26. You’re done!

Few More Scratch Remover Reviews:

Okay, I went ahead and got the rest of the scratches off the trunk lid. And it looks as good as new. So let’s move on to the next vehicle. My old ford ranger and has a single-stage paint job. In other words, it doesn’t have a clear coat, and it’s very faded. To seeing if these products will bring back some shine, I’ll be using some 800 grit sandpaper, and we’ll see how well they work testing the newly finished scratch.

• A doctor first, unfortunately, the new finished scratch. The doctor didn’t do an outstanding job at removing the scratches or the oxidized paint.

• Let’s see if McGuire’s rubbing compound can do any better. Well, there are some scratches left using McGuire’s rubbing compound. It did a lot better than the new finish scratch doctor. 

• Let’s see how turtle wax does next. I’m only going to use the turtle wax clarifying compound and not the sandpaper due to the time constraints. Unfortunately, turtle wax didn’t do very well. However, it would have done a lot better if we had more time to use the complete system. Unfortunately, the Fenix didn’t do nearly as well as the guitar’s rubbing compound. There’s still quite a bit of scratch and some faded paint.

• Testing the McGuire scratch eraser kit next to the guitar’s scratch eraser kit has done a fantastic job by far the best so far, almost completely removing the scratches and removing the oxidized paint.

• let’s see if the 3m can do even better since this is just a one-minute test. I’ll only be using the 3m rubbing compound and not the sandpaper or the polish 3m seems to have done the best. So far, almost completely removing the scratches and removing the oxidized paint 

• Let’s test the carphone next. The Gardot seems to have done just about the same as the Fenix and didn’t make very much progress in removing the scratches or the oxidized paint.

• Let’s test formula seemed to do the same as the cardigan and the Fenix and didn’t progress to removing the scratches or the oxidized paint.

Result of the Car Scratch Remover Test

So when it comes time to repair that scratch of that scuff, which product should you select? In my opinion, if you don’t have access to a drill, Mcguiar’s rubbing compound goes to work quickly. And does an excellent job for a very fair price. If you do have access to a drill. 3m will be very hard to beat and came out in the number one position. However, Maguire’s scratch eraser kit came in a very close second place and did an excellent job.

So, that gives us to the end of that very quick demonstration review.

You can read more about Automotive and How to take Care your car also Other Accessories.

The Car Iconic always cares about your safety and security.  You can buy your product from Amazon through our link. Cariconic.com provides the Best product and Support.

you can order this product on our Facebook pagehttps://www.facebook.com/cariconic/